14. Coprocessor 0
14.14 Config Register (16)
The R10000 processor's Config register has a different format from that of the R4400, since the R10000 processor has different mode bits and configurations, however some fields are still compatible: K0, DC, IC, and BE. The value of bits 24:0 are taken directly from the Mode bit settings during a reset sequence; refer to Table 8-1 for these bit definitions. Table 14-15 shows the R10000 Config register fields, along with values which are hardwired into the register at boot time; Figure 14-16 shows the Config register format.
Table 14-15 Config Register Field Definitions
Figure 14-16 Config Register Format
Copyright 1995, MIPS Technologies, Inc. -- 29 JAN 96
Generated with CERN WebMaker
